Please find the attached diagram for visual guidance. Follow the steps below carefully to ensure your tower is assembled safely and securely.
Attach Supports:
Secure support pieces A, B, and C to the side panel marked with the corresponding letters A, B, and C.
1. Add Second Side Panel:
Secure the second side panel to the same supports (A, B, and C) you just installed.
2. Upright the Tower:
Once Steps 1 and 2 are complete, carefully place the tower upright.
3. Install the Platform:
Choose your desired height and place the platform into the grooves. It might feel tight or slightly loose — that’s normal. Ensure it sits fully in the grooves and fasten all four screws securely.
4. Add the Step:
Place the shaped step into the grooves at your chosen height and secure it with all screws.
5. Insert the Final Piece:
Slide in the last small piece and secure it with both screws.
Important Notes:
Make sure each A, B, and C part aligns directly with its matching mark on the opposite panel.
Always line up the screws with the pre-drilled pilot holes — this prevents splitting the wood.
If anything doesn’t seem to align or fit properly, stop and contact us. We’re happy to guide you through the process.
A video assembly guide is also available — just let us know if you’d prefer to see it.
Once assembled, wipe down your Learning Tower with a damp cloth before use to remove any dust or residue.